Description
The HUAWEI LTE CPE B311B-853is a Long Term Evolution (LTE) wireless gateway for multiple users in household or small office environments. It enables users to access the Internet.
The B311B-853supports 3GPP Release 9with LTE CAT4.The supported service functions are as follows:
Data service up to FDD LTEDL 150Mbpsand UL 50Mbps, TDD LTEDL 110Mbps and UL 10Mbps
Working band: LTE: B1/B3/B5/B8/B34/B38/B39/B40(2300~2390MHz)/B41(2545~2655MHz), UMTS: B1/B8
Wi-Fi: 802.11 b/g/nand 802.11n2.4GHz Wi-Fi2x2 MIMO up to 300Mbps. Maximum Users: 32
1 GE port for LAN/WAN, 3GE ports for LAN
Routing mode: NAT enable (Default)/ Bridge mode (Customized support required)
VPN client service (L2TP, PPTP)
Customer management via WebUI or HUAWEI AI Life APP
Huawei Firmware Over the Air (HOTA)
Supports dual network dual pass and game speed acceleration
Hardware Specifications
Technical standard
WAN 3GPP Release 9
LAN IEEE 802.3/802.3u
Wi-Fi IEEE 802.11b/g/n
Working band/frequency
LTE B1/B3/B5/B8/B34/B38/B39/B40(2300~2390MHz)/B41(2545~2655MHz)
UMTS B1/B8
Wi-Fi 2.422 GHz – 2.482 GHz
External port
One power adapter port
One LAN/WAN port (RJ45), three LAN ports (RJ45)
One SIM card slot (nano-SIM)
Antennas
Built-in LTE/UMTS primary antenna
Built-in LTE/UMTS secondary antenna
Built-in Wi-Fi 2*2 2.4 GHz antenna
Built-in NFC antenna
LED Indicators
One Network status indicator
Steady on white: Connected to an LTE/UMTS/carrier broadband/ dual network dual pass enabled.
Steady on red: Internet access wizard not completed/SIM card not detected/No network available.
One Wi-Fi indicator
Steady on white: Wi-Fi is enabled.
Flash slowly white: A pairable HiLink device is detected.
Flash quickly white: HiLink pairing is in progress/WPS connection is in progress.
Off: Wi-Fi is disabled.
NOTE: The indicator starts to flash slowly only when B311B-853 detects a new HiLink device.
HiLink devices include Honor routers, Honor set-up boxes, Honor handsets (EMUI 5.0 and later), and more.
Three of signal strength indicators
More signal bars indicate a stronger signal.
Buttons
One Power ON/OFF switch
One H button
The Wi-Fi indicator flashes slowly when the router detects a HiLink device. Press the H button to connect the HiLink device to the router's Wi-Fi.
When the Wi-Fi indicator is steady on, press the H button to enable WPS.
One Reset button
Power consumption
< 12 W
AC/DC power supply
AC (input): 200V-240V 50Hz/60Hz
DC (output): 12V/1A
Dimensions (Maximum)
198 mm (Width) x 125 mm (High) x 25 mm (Deep)
Weight
About 246 g (excluding the power adapter)
Temperature
Working temperature: 0°C to 40°C
Storage temperature: -20°C to +70°C
Humidity
5% – 95% (non-condensing)
Certification/Compliance
3C
China Type Approval
SRRC Type Approval
RoHS
Wi-Fi
Services and Applications
Data Services
The B311B-853can access the Internet through mobile networks and Ethernet networks. By connecting to the B311B-853using Wi-Fi or a network cable, users can obtain access to high-speed Internet services and establish a local area network (LAN).
Accessing the Internet through a Mobile Network
The B311B-853can access the Internet through mobile networks.
Accessing the Internet through an Ethernet Network
The B311B-853'sLAN/WAN port can be connected to a wall-mounted Ethernet port using a network cable.
SMS
The B311B-853supports message writing/sending/receiving and group sending (up to 50 -contacts at a time).
Security Service
The B311B-853supports comprehensive and robust security services. It provides a firewall function and PIN protection mechanisms. These features allow users to connect their computers to the Internet and simultaneously protect their computers against security threats from the Internet.
Firewall Service
The B311B-853supports the enabling or disabling of a firewall on the network connection, which protects the device and network from attacks by hackers on the Internet and controls access to the Internet.
MAC Filtering
The B311B-853supports configuration of the Media Access Control (MAC) address to restrict network access.
Wi-Fi Authentication
The gateway supports the following user authentication protocols for Wi-Fi:
No encryption
WEP, WPA2-PSK(AES), WPA/WPA2-PSK(TKIP/AES).
VPN Function
VPN Client
VPN tunneling involves establishing and maintaining a logical network connection (that may contain intermediate hops). On this connection, packets constructed in a specific VPN protocol format are first encapsulated within some other base or carrier protocol, then transmitted between the VPN client and server, and finally decapsulated on the receiving side.
The B311B-853supports L2TP and PPTP tunneling protocols.
VPN Pass-Through
The B311B-853supportsL2TP/PPTPVPN pass-through for the LAN side device. The LAN side device can create a VPN tunnel to the VPN server.
HiLink
Supports up to 5HiLink devices to connect to B311B-853 through the H button to create an expanded network.
Supports quick connection between a HiLink device (such as Honor set-up boxes and Honor handsets running on EMUI 5.0 and later) and B311B-853through the H button.
What's in the box
1x Wireless Gateway
1x Power supply adapter
1x Quick Start